BALLOON SCREEN INK (BLN)

  • Printing onto PVC Plastic

  • Printing PVC credit cards coated either by the machine-pressed method or press-polished process

  • Good adhesion on PVC substrates

Finish : Semi Gloss
Ink Type : One Pack / Solvent-Based

Main Characteristics

Balloon

Substrates

USER INFORMATION

P90-40 Monofilament

Mesh

All solvent-resistant direct emulsion photo-stencils

Stencil Type

Recommended

70-75 , 85-90 durometer hardness polyurethane squeegee.

Squeegee

60 m2/Kg (Polyester Mesh No. P90-40)

Coverage

  • Stir well before use.

  • THE END USER MUST DETERMINE THE SUITABILITY OF THIS PRODUCT FOR THE INTENDED
    USE PRIOR TO PRODUCTION.

Important

  • Print on the balloon while inflated. Printing on a deflated balloon will create a lot of distortion on the design once it is blown up

  • After printing, do not deflate the balloon while the ink is still wet-the ink will bleed together and ruin the design

  • Air dry or blow dry after printing-not recommended to place in the oven after printing

Printing

  • et dry : 20-40 seconds

  • Air dry : Not over 5 minutes

Drying

  • 5-10% Thinner 2956

Thinning

Cleaning

Colour Range

11 Colours : 2 Standard and 9 CMS colours
Standard Colours

BLN200 White

BLN100 Black

CMS Based Colours

BLN347
Yellow RS

BLN327
Yellow GS

BLN407
Orange

BLN600
Blue

BLN590
Violet

BLN700
Green

BLN500
Red YS

BLN550
Red BS

BLN560
Magenta

BLN inks are available in 1 Kg container.
The Solvents are available in 20 ltr, 5 ltr and 1 ltr containers.

Standard Packing

Chaiyaboon Brothers Group Co., Ltd. offer a quality colour matching service. Colours can be matched to prints, wet ink samples or to PANTONE references. When placing an order, please include a sample of the substrate to be printed, along with any other relevant information, such as the type of mesh and squeegees that are to be used and the product resistance required. The minimum order for a colour match is 3Kg.

Colour Matching Service

GENERAL INFORMATION

  • Storage temperature should not be over 40 ํC. It should be stored in a dry location with good ventilation and
    away from heat or ignition sources.

  • When stored under these conditions, It is expected to have a shelf-life of 24 months from the date of manufacture.

  • Close the bottle tightly after every use.

  • This product is not stable when exposed to freezing temperatures and will not be shipped during such conditions.

Storage & Shipping

  • All colours complies with the following standards : EN71-3, Standard of The European Economic Community and
    Part1303, Title16, Code of Federal Regulation of U.S.A.

  • Whilst working with the adhesive, the consumption of food and drink, and smoking are not recommended.

  • CRD Ink should be used with care. Wear suitable PPE, for example, appropriate gloves and safety glasses.

  • Comprehensive information on the Safety and Handling of BLN ink in Safety Data Sheet, available on request.

Safety and Handling

BLN ink is made by Chaiyaboon Brothers Group Co., Ltd. with ISO 9001/ISO 14001
Certified by TUV NORD (Thailand) Ltd.

Certified Standards

For further information or other relevant data, please do not hesitate to contact us.
Chaiyaboon Brothers Group Co., Ltd. has a team of well-trained personnel who are ready to give help and
advise regarding product information and application.

Technical Service and Information