UV LED HIGH GLOSS INK FOR PP (LEDHP)
Pretreated Polypropylene (PP) and Polyethylene (PE)
Excellent adhesion
Smooth surface with good film strength
Excellent chemical resistance
Good recoatability
Finish : High Gloss
Ink Type : UV LED Curing
Main Characteristics
Pretreated PP, PE
The surface tension for treating the PP, PE substrates should not be lower than 38 dynes/cm
Substrates
USER INFORMATION
P140-34 to P180-34 Monofilament
Mesh
All solvent-resistant direct emulsion photo-stencils
Stencil Type
70-75, 85-90 durometer hardness polyurethane squeegee.
Squeegee
80-90 m2/Kg (P180-34 Monofilament)
Coverage
Stir well before use.
To ensure good adhesion, it is recommended to surface treat the PET substrates before printing.
THE END USER MUST DETERMINE THE SUITABILITY OF THIS PRODUCT FOR THE INTENDED
USE PRIOR TO PRODUCTION.
Important
Curing by UV LED Lamp at 16 W/cm2 or more
Wavelength 395 nm
Distance between substrate and UV LED Lamp is 4-6 millimeter
Curing
5-10% Retarder For UV Ink 2000
Thinning
For heavy ink stains, Screensolve (SSO038) can be used.
Cleaning
Colour Range
15 Colours : 2 Standard, 9 CMS and 4 Trichromatic colours
Standard Colours
LEDHP100
Black
LEDHP200
White
LEDHP090 Extender Based Clear
CMS Based Colours
LEDHP340
Yellow RS
LEDHP320
Yellow GS
LEDHP407
Orange
LEDHP600
Blue
LEDHP590
Violet
LEDHP700
Green
LEDHP500
Red YS
LEDHP550
Red BS
LEDHP560 Magenta
Trichromatic Colours
LEDHP110 Trichromatic
Black
LEDHP310 Trichromatic Yellow
LEDHP510 Trichromatic Magenta
LEDHP610 Trichromatic
Cyan
1 Kg container.
Standard Packing
GENERAL INFORMATION
Storage temperature should not be over 25 ํC. It should be stored in a dry location with good ventilation
and away from heat or ignition sources.When stored under these conditions, It is expected to have a shelf-life of 12 months from the date of manufacture.
Close the bottle tightly after every use.
This product is not stable when exposed to freezing temperatures and will not be shipped during such conditions.
Storage & Shipping
All colours comply with the following standard : EN71-3, Standard of The European Economic
Community and Part1303, Title16, Code of Federal Regulation of U.S.A.Whilst working with the ink, the consumption of food and drink, and smoking are not recommended.
LEDHP ink should be used with care. Wear suitable PPE, for example, appropriate gloves and safety glasses.
Comprehensive information on the Safety and Handling of LEDHP ink in Safety Data Sheet, available on request.
Safety and Handling
LEDHP ink is made by Kulwong Co., Ltd. with ISO 9001/ISO 14001 Certified by TUV NORD (Thailand) Ltd.
Certified Standards
For further information or other relevant data, please do not hesitate to contact us.
Chaiyaboon Brothers Company (CBC) has a team of well-trained personnel who are ready to give help
and advise regarding product information and application.