UV LED INK FOR TREATED PP (LEDTP)

  • Excellent adhesion on Pretreated Polypropylene (PP)

  • Good Opacity and Smooth surface with good film strength

    Excellent chemical resistance Such as IPA 70%

  • Silicone-free surface, suitable for recoatability

Finish : Gloss

Ink Type : UV LED Curing

Main Characteristics

  • Pretreated PP, PE

  • The surface tension for treating the PP, PE substrates should not be lower than 38 dynes/cm

Substrates

USER INFORMATION

  • P140-34 to P180-34 Monofilament

Mesh

All solvent-resistant direct emulsion photo-stencils

Stencil Type

Recommended

70-75, 85-90 durometer hardness polyurethane squeegee.

Squeegee

80-90 m2/Kg (P180-34 Monofilament)

Coverage

  • Stir well before use.

  • To ensure good adhesion, it is recommended to surface treat the PET substrates before printing.

  • THE END USER MUST DETERMINE THE SUITABILITY OF THIS PRODUCT FOR THE INTENDED
    USE PRIOR TO PRODUCTION.

Important

  • Curing by UV LED Lamp at 16 W/cm2 or more Wavelength 395 nm

  • Distance between substrate and UV LED Lamp is 4-6 millimeter

  • If the ink cure insufficiently, reactivity can be increased with addition of liquid photo intiator solution ADD010 (addition 3-5%)

Curing

  • To achieve optimal performance, ink may require additive adjustment depending on printing condition and substrate grade.

  • ADPRO02 = 1-3 % Improve adhesion on PP.

  • AADU04 = 0.5-3% Defoamer Additive and enhance surface uniformity during screen printing operation.

Printing

  • 5-10% UV Ink Thinner 5000

Thinning

  • Cleaner 2940

  • For heavy ink stains, Screensolve (SSO038) can be used.

Cleaning

Colour Range

11 Colours : 2 Standard and 9 CMS colours
Standard Colours

LEDTP100
Black

LEDTP200
White

LEDTP090 Extender Based Clear

CMS Based Colours

LEDTP340
Yellow RS

LEDTP320
Yellow GS

LEDTP407
Orange

LEDTP600
Blue

LEDTP590
Violet

LEDTP700
Green

LEDTP500
Red YS

LEDTP550
Red BS

LEDTP560 Magenta

1 Kg container.

Standard Packing

GENERAL INFORMATION

  • Storage temperature should not be over 25 ํC. It should be stored in a dry location with good ventilation
    and away from heat or ignition sources.

  • When stored under these conditions, It is expected to have a shelf-life of 12 months from the date of manufacture.

  • Close the bottle tightly after every use.

  • This product is not stable when exposed to freezing temperatures and will not be shipped during such conditions.

Storage & Shipping

  • All colours comply with the following standard : EN71-3, Standard of The European Economic
    Community and Part1303, Title16, Code of Federal Regulation of U.S.A.

  • Whilst working with the ink, the consumption of food and drink, and smoking are not recommended.

  • LEDTP ink should be used with care. Wear suitable PPE, for example, appropriate gloves and safety glasses.

  • Comprehensive information on the Safety and Handling of LEDTP ink in Safety Data Sheet, available on request.

Safety and Handling

LEDTP ink is made by Kulwong Co., Ltd. with ISO 9001/ISO 14001 Certified by TUV NORD (Thailand) Ltd.

Certified Standards

For further information or other relevant data, please do not hesitate to contact us.
Chaiyaboon Brothers Company (CBC) has a team of well-trained personnel who are ready to give help
and advise regarding product information and application.

Technical Service and Information