HARDENER (PATLY)
For higher water-resistance of direct photostencils
Design to use with polyester mesh and is not suitable for nylon mesh
Low odor
Easy to use
Product Characteristics : Liquid / Clear Red colour
Main Characteristics
USER INFORMATION
Make the stencil as required.
Dry the screen thoroughly.
Apply Patly on both sides of the finished stencil with a soft brush or sponge.
Ensure that both sides of the screen are completely treated.
Use a fan or allow to air-dry placing it in a drying cabinet.
Ensure that the entire stencil area is thoroughly dry before use.
Instruction for use
Stencils that have been treated with Patly will be more difficult to remove and will require the use ofa high pressure gun
after decoating with Screenstrip.
Important
25 Kg, 5 Kg and 1 Kg
Standard Packing
GENERAL INFORMATION
Storage temperature should not be over 40 ํC. It should be stored in a dry location with good ventilation and away from heat
or ignition sources.When stored under these conditions, It is expected to have a shelf-life of 24 months from the date of manufacture.
Close the bottle tightly after every use.
This product is not stable when exposed to freezing temperatures and will not be shipped during such conditions.
Storage & Shipping
Is free from any toxic, carcinogenic, mutagenic and reprotoxic chemicals.
Does not have a flashpoint and is, therefore, exempt from the Highly Flammable Liquid Regulations.
Patly should be used with care. Wear suitable PPE, for example, appropriate gloves and safety glasses.
Should be stored away from children.
Comprehensive information on the Safety and Handling of Patly in Safety Data Sheet.
Safety and Handling
Hardener (Patly) is made by Kulwong Co., Ltd. with ISO 9001/ISO 14001 Certified by TUV NORD (Thailand) Ltd.
Certified Standards
For further information or other relevant data, please do not hesitate to contact us.
Chaiyaboon Brothers Company (CBC) has a team of well-trained personnel who are ready to give help
and advise regarding product information and application.