PP UNTREATED INK (PPD)
Suitable for untreated and treated Polypropylene (PP)
Good adhesion which gives it excellent rub resistance
Fast drying
APPLICATION GUIDE - PPD Ink Printing Procedure
PPD Ink Printing Procedure (Short Version)
Screen Preparation: Expose the artwork on the screen and mount it on the press.
Substrate Positioning: Set the alignment guide (feeding jig) for accurate placement.
Surface Preparation: Clean the workpiece to remove dust, oil, or contaminants.
Ink Mixing: Stir ink and mix with Retarder 6032 (10–15%).
Printing: Print with a snap distance of 2–3 mm.
Drying: Air dry 15–20 min or jet-dry at 60 °C for 15–20 sec.
Finish : Semi Gloss
Ink Type : One Pack / Solvent-Based
Main Characteristics
Untreated and Treated Polypropylene (PP)
Substrates
USER INFORMATION
P90-48 to P120-34 Monofilament
N90-44 to N120-35 Monofilament
Mesh
All solvent-resistant direct emulsion photo-stencils
Stencil Type
70-75 , 85-90 durometer hardness polyurethane squeegee.
Squeegee
55-65 m2/Kg (Polyester Mesh No. P120-34 to N120-35)
Coverage
Stir well before use.
THE END USER MUST DETERMINE THE SUITABILITY OF THIS PRODUCT FOR THE INTENDED
USE PRIOR TO PRODUCTION.
Important
Jet dry : 60 ํC. 2-3 minutes
Air dry : 15-20 minutes
Drying
10-15 % Retarder 6032
Thinning
For heavy ink stains, Screensolve (SSO038) can be used.
Cleaning
Colour Range
11 Colours : 2 Standard and 11 CMS colours
Standard Colours
PPD100 Black
PPD200 White
CMS Based Colours
PPD347
Yellow RS
PPD327
Yellow GS
PPD407
Orange
PPD600
Blue
PPD590
Violet
PPD700
Green
PPD500
Red YS
PPD550
Red BS
PPD560
Magenta
24 Kg, 5 Kg and 1 Kg containers.
Standard Packing
GENERAL INFORMATION
Storage temperature should not be over 40 ํC. It should be stored in a dry location with good ventilation and away from heat or ignition sources.
When stored under these conditions, It is expected to have a shelf-life of 24 months from the date of manufacture.
Close the bottle tightly after every use.
This product is not stable when exposed to freezing temperatures and will not be shipped during such conditions.
Storage & Shipping
All colours complies with the following standards : EN71-3, Standard of The European Economic Community and Part1303, Title16, Code of Federal Regulation of U.S.A.
Whilst working with the adhesive, the consumption of food and drink, and smoking are not recommended.
PPD Ink should be used with care. Wear suitable PPE, for example, appropriate gloves and safety glasses.
Comprehensive information on the Safety and Handling of PPD ink in Safety Data Sheet, available on request.
Safety and Handling
PPD ink is made by Chaiyaboon Brothers Group Co., Ltd. with ISO 9001/ISO 14001
Certified by TUV NORD (Thailand) Ltd.
Certified Standards
For further information or other relevant data, please do not hesitate to contact us.
Chaiyaboon Brothers Group Co., Ltd. has a team of well-trained personnel who are ready to give help and
advise regarding product information and application.