SCREENFIX (SFX)

SFX001 + SFX002

  • 2 component frame adhesive

  • Applicable to metal and wooden frames

  • Easy to use

  • Smooth finish

SFX007 or SFX007 + SFX002

  • 1 or 2 component frame adhesive

  • Applicable to metal and wooden frames

  • Easy to use

  • Smooth finish

  • High stability

SFX005 + SFX002

  • 2 component frame adhesive

  • Applicable to metal and wooden frames

  • Easy to use

  • Smooth finish

  • Fast dry

SFX011 + SFX002

  • 2 component frame adhesive

  • Applicable to metal and wooden frames

  • Easy to use

  • Smooth finish

  • Solvent resisitance

Product Characteristics : Viscous / Red colour

  • SFX001 Viscous / Red colour

  • SFX002 Viscous / Clear (Screenfix Catalyst)

  • SFX005 Viscous / Red colour (Fast Dry)

  • SFX007 Viscous / Light Yellow colour

  • SFX011 Viscous / Red colour

Main Characteristics

  • Shake the Screenfix and Screenfix Catalyst before use.

  • Do not mix more adhesive than is likely to be used within the 30 min (approx.) pot-life.

  • Add Thinner in mixed adhesive has long pot life (5-7 days for SFX001).

Important

USER INFORMATION

Instruction of two pot for use

  • SFX001 (Screenfix) :
    SFX002 (Screenfix Catalyst)

  • SFX005 (Screenfix Fast) :
    SFX002 (Screenfix Catalyst)

  • SFX007 (Screenfix) :
    SFX002 (Screenfix Catalyst)

  • SFX011 (Screenfix) :
    SFX002 (Screenfix Catalyst)

  • Remove the old adhesive on the frame before re-using.

  • Aluminium block screen frame should be treated to roughen by abrasive wheel and cleaned by solvent or Thinner (2938).

  • Mix Screenfix and Screenfix Catalyst in a ratio of 10:1 by weight.

  • Ensure the two parts are mixed in the correct ratio, as lack of or excessive catalyst can lead to poor solvent resistance.

  • Ensure good contact between fabric and frame and that the adhesive has been worked thoroughly through the mesh openings onto the frame’s surface, especially when using finer mesh counts.

  • Allow the adhesive to dry for up to 30 minutes before cutting the frame out from the master stretcher. In cold and damp conditions and when stretching stainless steel or coarse meshes, extra time should be allowed.

  • Should be left to cure overnight before being exposed to strong solvent.

  • SFX007 (Screenfix)

  • Remove the old adhesive on the frame before re-using.

  • Aluminium block screen frame should be treated to roughen by abrasive wheel and cleaned by solvent or Thinner (2938).

  • Ensure good contact between fabric and frame and that the adhesive has been worked thoroughly through the mesh openings onto the frame’s surface, especially when using finer mesh counts.

  • Allow the adhesive to dry for up to 30 minutes before cutting the frame out from the master stretcher. In cold and damp conditions and when stretching stainless steel or coarse meshes, extra time should be allowed.

  • Should be left to cure overnight before being exposed to strong solvent.

Instruction for use

  • SFX001 Screenfix :
    5 ltr. and 1 ltr.

  • SFX002 Screenfix Catalyst :
    100 ml.

  • SFX005 Screenfix fast :
    5 ltr. and 1 ltr.

  • SFX007 Screenfix :
    1 ltr.

  • SFX011 Screenfix :
    1 ltr.

Standard Packing

GENERAL INFORMATION

  • Screenfix Storage temperature should not be over 40 ํC and Screenfix Catalyst Storage temperature should not be over 25 ํC.
    It should be stored in a dry location with good ventilation and away from heat or ignition sources.

  • When stored under these conditions, It is expected to have a shelf-life of 24 months from the date of manufacture.

  • SFX002 and SFX007 can be stored for 12 months.

  • Close the bottle tightly after every use.

  • This product is not stable when exposed to freezing temperatures and will not be shipped during such conditions.

Storage & Shipping

  • Is free from any toxic, carcinogenic, mutagenic and reprotoxic chemicals.

  • Does not have a flashpoint and is, therefore, exempt from the Highly Flammable Liquid Regulations.

  • Screenfix should be used with care. Wear suitable PPE, for example, appropriate gloves and safety glasses.

  • Should be stored away from children.

  • Comprehensive information on the Safety and Handling of Screenfix in Safety Data Sheet.

Safety and Handling

Screenfix (SFX) is made by Chaiyaboon Brothers Group Co., Ltd. with ISO 9001/ISO 14001
Certified by TUV NORD (Thailand) Ltd.

Certified Standards

For further information or other relevant data, please do not hesitate to contact us.
Chaiyaboon Brothers Group Co., Ltd. has a team of well-trained personnel who are ready to give help and
advise regarding product information and application.

Technical Service and Information