SCREENFIX (SFX005)

SFX005 screen frame adhesive is a fast-drying two-pack screen frame adhesive. When mixed with catalyst (SFX002),it provides strong bonding between wooden or metal frames and screen mesh made from nylon, polyester, or metal fabric. This adhesive offers rapid adhesion, excellent durability against screen printing inks, thinners, and all types of cleaning solvents. It is easy to use and has a long shelf life before mixing with the catalyst.

  • 2 component frame adhesive

  • Applicable to metal and wooden frames

  • Easy to use

  • Smooth finish

  • Fast dry

Properties
SFX005 + SFX002

Product Characteristics :

  • SFX005 Viscous / Red colour

  • SFX002 Viscous / Clear (Screenfix Catalyst)

Main Characteristics

  • The frame must be clean and dry.

  • Using an aluminum or steel frame, lightly sand the surface to make it rough and remove any dirt or contaminants.

  • Rinse with water and allow it to dry completely again.

  • Apply a thin coat of SFX005 to the frame.

  • Allow the adhesive to become tacky before stretching the screen mesh onto the frame.

Screen Frame Preparation

Shake the Screenfix and Screenfix Catalyst before use.

Important

USER INFORMATION

  • Mix the Screenfix Fast and Screenfix Catalyst in a ration of 10:1 by weight.

  • Using a short-bristle, stiff brush, apply screen frame adhesive (SFX005) evenly along the screen frame and onto the tensioned screen mesh. Ensure proper contact between the frame and the mesh, especially when using fine-mesh screens.

  • Allow the adhesive to dry for approximately 20 minutes, then trim away the excess screen mesh from the frame.

  • Allow the adhesive to cure completely for at least 2 additional hours before use or preparing the screen stencil. Leaving it to cure overnight is recommended for maximum solvent resistance and durability against all types of solvents.

  • Brushes used for applying screen frame adhesive (SFX005) should be cleaned immediately after use. Remove any adhesive from the brush by wiping it off, or soak the brush in Fast Thinner (2938).

Instruction for use
SFX005 (Screenfix Fast)
SFX002 (Screenfix Catalyst).

  • The screen frame adhesive and catalyst should be mixed thoroughly until homogeneous before use.

  • Prepare an appropriate amount for each application to prevent the mixture from curing or forming lumps.

Cautions

SFX001 Screenfix : 5 ltr. and 1 ltr.SFX002
SFX002 Screenfix Catalyst : 100 ml.

Standard Packing

  • Screenfix Storage temperature should not be over 40 ํC and Screenfix Catalyst Storage temperature should not be over 25 ํC.
    It should be stored in a dry location with good ventilation and away from heat or ignition sources.

  • When stored under these conditions, It is expected to have a shelf-life of 24 months from the date of manufacture.

  • SFX002 can be stored for 12 months.

  • Close the bottle tightly after every use.

  • This product is not stable when exposed to freezing temperatures and will not be shipped during such conditions.

Storage & Shipping

  • Is free from any toxic, carcinogenic, mutagenic and reprotoxic chemicals.

  • Does not have a flashpoint and is, therefore, exempt from the Highly Flammable Liquid Regulations.

  • SFX001 and SFX002 should be used with care. Wear suitable PPE, for example, appropriate gloves and safety glasses.

  • Should be stored away from children.

  • Comprehensive information on the Safety and Handling of Screenfix in Safety Data Sheet.

Safety and Handling

Screenfix (SFX001) is made by Chaiyaboon Brothers GroupCo., Ltd. with ISO 9001/ISO 14001
Certified by TUV NORD (Thailand) Ltd.

Certified Standards

For further information or other relevant data, please do not hesitate to contact us.
Chaiyaboon Brothers Group Co., Ltd. has a team of well-trained personnel who are ready to give help and
advise regarding product information and application.

Technical Service and Information