SCREENFIX (SFX007)

SFX007 screen frame adhesive is a transparent yellow screen frame adhesive that can be used with or without catalyst. SFX007 provides excellent adhesion between metal frames and screen mesh woven from nylon or polyester. It easy to use, has a mild odor, and is cost-effective. It also offers strong resistance to printing inks and all types of cleaning solvents used in screen printing applications.

  • 1 or 2 component frame adhesive

  • Used for adhering the screen mesh to the screen frame

  • Easy to use

  • Smooth finish

  • High stability

Properties

Product Characteristics :

Main Characteristics

One-component for frame adhesive

  • SFX007 Viscous / Light Yellow colour

Two-component for frame adhesive

  • SFX007 Viscous / Light Yellow colour

  • SFX002 Viscous / Clear (Screenfix Catalyst)

  • The frame must be clean and dry.

  • Using an aluminum or steel frame, lightly sand the surface to make it rough and remove any dirt or contaminants.

  • Rinse with water and allow it to dry completely again.

  • Apply a thin coat of SFX007 to the frame.

  • Allow the adhesive to become tacky before stretching the screen mesh onto the frame.

Screen Frame Preparation

SFX007 (Screenfix)

  • Can mix with Screenfix Catalyst in a ratio of 10:1 by weight to improve the resistance.

  • Using a short-bristle, stiff brush, apply screen frame adhesive (SFX007) evenly along the screen frame and onto the tensioned screen mesh. Ensure proper contact between the frame and the mesh, especially when using fine-mesh screens.

  • Allow the adhesive to dry for approximately 30 minutes, then trim away the excess screen mesh from the frame.

  • Allow the adhesive to cure completely for at least 2 additional hours before use or preparing the screen stencil. Leaving it to cure overnight is recommended for maximum solvent resistance and durability against all types of solvents.

  • Brushes used for applying screen frame adhesive (SFX007) should be cleaned immediately after use. Remove any adhesive from the brush by wiping it off, or soak the brush in Fast Thinner (2938).

Instruction for use

  • The screen frame adhesive and catalyst should be mixed thoroughly until homogeneous before use.

  • Prepare an appropriate amount for each application to prevent the mixture from curing or forming lumps.

Cautions

  • SFX007 Screenfix : 1 ltr

  • SFX002 Screenfix Catalyst : 100 ml.

Standard Packing

  • Storage temperature should not be over 40 ํC. It should be stored in a dry location with good ventilation and away from heat or ignition sources.

  • When stored under these conditions, It is expected to have a shelf-life of SFX007 12 months from the date of manufacture.

  • Close the bottle tightly after every use.

  • This product is not stable when exposed to freezing temperatures and will not be shipped during such conditions.

Storage & Shipping

  • Is free from any toxic, carcinogenic, mutagenic and reprotoxic chemicals.

  • Does not have a flashpoint and is, therefore, exempt from the Highly Flammable Liquid Regulations.

  • Screenfix should be used with care. Wear suitable PPE, for example, appropriate gloves and safety glasses.

  • Should be stored away from children.

  • Comprehensive information on the Safety and Handling of Screenfix in Safety Data Sheet.

Safety and Handling

Screenfix (SFX007)is made by Chaiyaboon Brothers GroupCo., Ltd. with ISO 9001/ISO 14001
Certified by TUV NORD (Thailand) Ltd.

Certified Standards

For further information or other relevant data, please do not hesitate to contact us.
Chaiyaboon Brothers Group Co., Ltd. has a team of well-trained personnel who are ready to give help and
advise regarding product information and application.

Technical Service and Information