SCREENFIX (SFX015)

Screenfix is a two pack screen mounting adhesive, formulated for fixing nylon, polyester or metal fabrics onto wood, steel, aluminium or painted metal frames. When fully cured, this adhesive is highly resistant to all solvents typically used in the screen printing process. It is very easy and economical to use.

  • 2 component frame adhesive

  • Used for adhering the screen mesh to the screen frame

  • Easy to use

  • Smooth finish

  • Fast dry

Properties
SFX015 + SFX002

Product Characteristics :

  • SFX015 Viscous / Clear Red colour

  • SFX002 Viscous / Clear (Screenfix Catalyst)

Main Characteristics

  • The frame must be clean and dry.

  • Using an aluminum or steel frame, lightly sand the surface to make it rough and remove any dirt or contaminants.

  • Rinse with water and allow it to dry completely again.

  • Apply a thin coat of SFX005 to the frame.

  • Allow the adhesive to become tacky before stretching the screen mesh onto the frame.

Screen Frame Preparation

  • Mix the Screenfix and Screenfix Catalyst in a ratio of 10:1 by weight before use.

  • Using a short-bristle, stiff brush, apply screen frame adhesive (SFX015) evenly along the screen frame and onto the tensioned screen mesh. Ensure proper contact between the frame and the mesh, especially when using fine-mesh screens.

  • Allow the adhesive to dry for approximately 30 minutes, then trim away the excess screen mesh from the frame.

  • Allow the adhesive to cure completely for at least 2 additional hours before use or preparing the screen stencil. Leaving it to cure overnight is recommended for maximum solvent resistance and durability against all types of solvents.

  • Brushes used for applying screen frame adhesive (SFX015) should be cleaned immediately after use. Remove any adhesive from the brush by wiping it off, or soak the brush in Fast Thinner (2938).

Instruction for use
SFX015 (Screenfix)
SFX002 (Screenfix Catalyst).

  • The screen frame adhesive and catalyst should be mixed thoroughly until homogeneous before use.

  • Prepare an appropriate amount for each application to prevent the mixture from curing or forming lumps.

Cautions

  • SFX015 Screenfix : 5 ltr. and 1 ltr.

  • SFX002 Screenfix Catalyst : 100 ml.

Standard Packing

  • Screenfix Storage temperature should not be over 40 ํC and Screenfix Catalyst Storage temperature should not be over 25 ํC.
    It should be stored in a dry location with good ventilation and away from heat or ignition sources.

  • When stored under these conditions, It is expected to have a shelf-life of 24 months from the date of manufacture.

  • SFX002 can be stored for 12 months.

  • Close the bottle tightly after every use.

  • This product is not stable when exposed to freezing temperatures and will not be shipped during such conditions.

Storage & Shipping

  • Is free from any toxic, carcinogenic, mutagenic and reprotoxic chemicals.

  • Does not have a flashpoint and is, therefore, exempt from the Highly Flammable Liquid Regulations.

  • SFX001 and SFX002 should be used with care. Wear suitable PPE, for example, appropriate gloves and safety glasses.

  • Should be stored away from children.

  • Comprehensive information on the Safety and Handling of Screenfix in Safety Data Sheet.

Safety and Handling

Screenfix (SFX015) is made by Chaiyaboon Brothers GroupCo., Ltd. with ISO 9001/ISO 14001
Certified by TUV NORD (Thailand) Ltd.

Certified Standards

For further information or other relevant data, please do not hesitate to contact us.
Chaiyaboon Brothers Group Co., Ltd. has a team of well-trained personnel who are ready to give help and
advise regarding product information and application.

Technical Service and Information