SCREENPASTE (SPA053)

Screenpaste (SPA053) is used to prepare screen mesh for reuse. It effectively removes haze stains, residual printing ink, stencil adhesives, and emulsion residues remaining on the screen. It also helps eliminate grease, oil, and other contaminants from the mesh surface. For enhanced cleaning performance, it is commonly used in combination with Screensolve (SSO038).

  • For removing stains from of mesh

  • Helps remove ghost images and other stains caused by screen printing inks

  • Enhanced performance when use with Screensolve

  • Covenient to use and suitable for all types of screen mesh

Properties

Product Characteristics : Paste / Cream colour

Main Characteristics

  • For using SPA053 only, apply it to both sides of the screen mesh and scrub thoroughly across the entire screen surface. Allow it to remain for 2–3 minutes, then rinse thoroughly with clean water.

  • To use them together, apply Screensolve (1 part) to the srceen with a rag and add Screenpaste (1 part) to both sides of the mesh using a brush.

  • Mix the two products in a circular motion, working the mixture into the screen.

  • Allow the screen to stand for 15 minutes.

  • Longer periods can damage polyester mesh.

  • Rinse off thoroughly with water before using a high-pressure water gun and allow the screen to dry.

Instruction for use

30 Kg, 25 Kg, 5 Kg and 1 Kg

Standard Packing

  • Storage temperature should not be over 40 ํC. It should be stored in a dry location with good ventilation and away from heat or ignition sources.

  • When stored under these conditions, It is expected to have a shelf-life of 24 months from the date of manufacture.

  • Close the bottle tightly after every use.

  • This product is not stable when exposed to freezing temperatures and will not be shipped during such conditions.

Storage & Shipping

  • Is free from any toxic, carcinogenic, mutagenic and reprotoxic chemicals.

  • Does not have a flashpoint and is, therefore, exempt from the Highly Flammable Liquid Regulations.

  • SPA053 should be used with care. Wear suitable PPE, for example, appropriate gloves and safety glasses.

  • SPA053 contains sodium hydroxide. It is corrosive and can cause severe burns. Avoid splashing and if skin contact occurs,
    irrigate the area with plenty of water.

  • Should be stored away from children.

  • Comprehensive information on the Safety and Handling of Screenpaste in Safety Data Sheet.

Safety and Handling

Screenpaste (SPA053) is made by Chaiyaboon Brothers Group Co., Ltd. with ISO 9001/ISO 14001
Certified by TUV NORD (Thailand) Ltd.

Certified Standards

For further information or other relevant data, please do not hesitate to contact us.
Chaiyaboon Brothers Group Co., Ltd. has a team of well-trained personnel who are ready to give help and
advise regarding product information and application.

Technical Service and Information