DUAL CURE DISCHARGE (TDC101)
Diazo sensitized emulsion
Easy spotting out on coloured or white mesh
Excellent edge difinition and mesh bridging
The tack free sureface with good tape resistance and is easily decoatable
Long print durability
For graphic and fabric printing industrial jobs
Type : Two Pack / Blue colour
Sensitizer Type : Syrup
Solid content (unsensitized) % : 41 %
Recommended inks : Solvent based ink and UV based ink.
Main Characteristics
USER INFORMATION
Add the powder sensitizer to the bottle and add water until the bottle is approximately 2/3 full.
Shake the bottle well until the contents have dissolved.
Add sensitizer solution emulsion and stir well before use.
Leave the emulsion to de-gas for 1 hr before use.
Instruction for use
Special safelight is not essential, but yellow or weak illumination is desirable.
Caution
New screen should be abraded with Screenprep (SPR034) before use for optimum stencil durability.
Degreasing the screen, use Degreaser Plus (P-6419)
Preparing the Screen
Manual
Set the screen on edge slightly inclined away from the operator and then follow this procedure:
Apply one or two coats of this emulsion, wet on wet, to the print side of screen.
Apply one or two coats of this emulsion, wet on wet, to the squeegee side of screen.
If a higher build of emulsion is required extra coats should be applied, wet on wet to the print side.
Automatic
When using an automatic coating machine, a simultaneous single coat on each side of the screen is recommended.
If higher builds are required, extra coats should be applied to the print side of the screen.
Coating
Put coated screen in hot air oven with squeegee side up. Do not exceed 40 ํC.
Drying
Exposure time : 70-100 Seconds (3000W Metal Halide)
* Distance 100 cm. / Using 120-34Y Polyester Screen Mesh.
Exposure
Place the screen in washout booth and gently spray both sides, increase the spray pressure slightly. Continue developing until or parts of the image appear clean and sharp.
Developing
Check for pinholes or blemishes. Spot out with a suitable filler use Screen Filler (22997)
Spotting
Screenstrip Powder (SST002) thoroughly to both side of the stencil.
Screenstrip Liquid (SST004) thoroughly to both side of the stencil.
Screenstrip Paste (SST007) thoroughly to both side of the stencil.
Reclaiming the Screen
Emulsion :
1 Kg use with sensitizer code US015- 8 g
5 Kg use with sensitizer code US015- 40 g
Standard Packing
GENERAL INFORMATION
Emulsion and sensitizer should be stored in temperature not over 25 ํC.
Unsensitized emulsion should be stored under similar conditions and can be stored for 24 months.
Diazo sensitizer should be stored under similar conditions and can be stored for 12 months.
Close the bottle tightly after every use.
This product is not stable when exposed to freezing temperatures and will not be shipped during such conditions.
Storage & Shipping
Is free from any toxic, carcinogenic, mutagenic and reprotoxic chemicals.
Does not have a flashpoint and is, therefore, exempt from the Highly Flammable Liquid Regulations.
Should be stored away from children.
Comprehensive information on the Safety and Handling of Diazol Universal in Safety Data Sheet
Safety and Handling
U015 is made by Kulwong Co., Ltd. with ISO 9001/ISO 14001 Certified by TUV NORD (Thailand) Ltd.
Certified Standards
For further information or other relevant data, please do not hesitate to contact us.
Chaiyaboon Brothers Company (CBC) has a team of well-trained personnel who are ready to give help
and advise regarding product information and application.